Clear answers for a door that will not cooperate.24/7

Spring systems

Garage door torsion spring replacement

Torsion springs sit on a shaft above many garage doors. They wind and unwind as the door moves. Selecting one by appearance alone can leave the door unbalanced, so measurement matters.

Signs to watch for

Different faults can look alike. These clues can help you explain the problem, but a technician needs to inspect the door to identify the cause.

  • A gap appears in the coil above the door.
  • The door feels heavy or slips down after manual movement.
  • The opener struggles even though the tracks appear clear.

What happens next

The technician should check door weight and dimensions, identify the spring specifications, inspect the shaft and bearings, fit the replacement and test balance and travel. Ask what parts and labor are included in the quote.

Safety note: Never attempt to wind or unwind a torsion spring without training. The tension is dangerous even when the door is not moving.

Related guides

THE NEXT STEP

Talk through the problem

Tell the operator what the door is doing and ask about coverage, availability and any visit fee before agreeing to service.

Call (833) 874-1408

FAQ

Torsion spring replacement – your questions answered

How is a torsion spring different from an extension spring?

A torsion spring mounts horizontally above the door on a central metal shaft and stores energy by twisting. Extension springs run along the upper horizontal tracks on either side of the door and store energy by stretching. Torsion springs are more common on modern residential doors, last longer, and are considered safer because they are contained on the shaft even when broken.

How much does torsion spring replacement cost?

In the United States, torsion spring replacement pricing is determined by the size and cycle rating of the spring, as well as door balance requirements. Always ask for an itemised quote covering the springs, labour, and safety balance test before approving service.

Can I replace a garage door torsion spring myself?

Torsion spring replacement is one of the most hazardous DIY garage repairs. The spring is wound under hundreds of foot-pounds of torque. Without proper winding bars and training, the spring can uncoil violently, causing severe injury. This is a job for a trained technician with the correct tools.

Why does spring size matter when replacing a torsion spring?

The spring must counterbalance the specific weight and size of your door. Wire diameter, inside diameter, and spring length all affect the torque produced. A spring that is too light will leave the door feeling heavy and overload the opener. A spring that is too strong can slam the door open. A technician uses the door's weight and measurements to select the correct specification.

What affects the cost to replace a torsion spring on a garage door?

Factors include whether one or both springs are replaced, the door weight and height, whether high-cycle springs are chosen, and whether bearings or cables also need replacement. A technician will evaluate the system in person and provide a full written estimate.

How long does it take to replace a torsion spring on a garage door?

A qualified technician can typically complete a torsion spring replacement in one to two hours. This includes removing the broken spring, measuring and fitting the replacement, and performing a balance test before reconnecting the opener. Same-day service is available from most providers in US metro areas.

What is the lifespan of a garage door torsion spring?

Standard torsion springs are rated for 10,000 cycles. With typical residential use of four door activations per day, this works out to approximately seven years. High-cycle springs rated at 20,000 or 30,000 cycles are available as an upgrade. If you are already paying for a spring replacement, it is worth asking about the higher-cycle option.

What causes a garage door torsion spring to break?

Metal fatigue from repeated use is the most common cause. Cold weather makes the metal more brittle and accelerates wear. Rust, improper lubrication, incorrect spring sizing from a prior repair, and physical damage from a car collision can also shorten spring life.

How do I tell what torsion spring I need for my garage door?

A technician must measure the door's height, width, and weight, as well as the existing spring's wire size, inside diameter, and length. These measurements cannot be estimated reliably by appearance. Using an incorrect spring creates a safety hazard and puts extra strain on the opener motor.

Can I replace a torsion spring myself at Home Depot?

Home Depot sells torsion springs, but purchasing and installing them without the correct winding bars and technical knowledge is dangerous. The risk of serious injury from improper spring installation is significant. Professional installation also ensures the spring is matched correctly to your door weight, which a self-installation often misses.